Welcome
back to my series of preemie caps that, as I’m sure you know by now, I’ve just
recently donated 200 newborn / preemie baby caps over three institutions in Australia.
As I started making this series, I started 'learning' all their names.. dunno why but they’re
wildly popular – didn’t even know there were so many of them!
This is the full series that I've made and over the past few days I've posted the red and white ones so in case you missed those, click on Crochet headwear pattern or Crochet beanie pattern labels on the right of this blog... and then follow me either here on Facebook for more fun crochet stuff. Cheers.
Do remember to scroll till the bottom of this blog for the full series of Angry Bird cap creations
Thank you for joining me.
In case you have just joined me, know that you can access all of my earlier creations by checking under ‘categories’ on the right hand side of this blog under “Labels”. Then, for your convenience, follow me here or on Facebook, You Tube, Pinterest, Twitter or Instagram and for more beanies
Check out all my social media handles at the bottom of this blog
Oh, and may I add that the fastest way to find any of my blogs is via Pinterest.
All my blogs can be printed. Find the printer friendly (green) link at the bottom of this blog. You can also hit Control P (or Command P for Mac) on your keyboard, and the blog will go directly to the connected printer.
Remember that you only print if absolutely essential. Save paper – Save Our Earth.
Do remember to add my blog URL when you make and show off your creation.
Just copy the link on the search bar above - that's the blog URL.
To purchase this or similar yarn online, click here to buy your yarns online via Amazon. While you will still pay the same, I may get paid by Amazon as well.
This is a free blog - so do pay it forward for me. Cheers.
This beautiful creation was donated to the lovely ladies who run the stall at the Gold Coast Hospital Foundation
Materials used : Today I’ve used some of our lovely Indian Oswal Cashmilon 4-ply acrylic yarns with a 3 mm crochet hook ; embroidery needle and craft glue for sealing ends
Abbreviations used :
sc : single crochet dc : Double crochet
ch : chain ch-sp : chain space
sp : space rep : Repeat
Stitches used :
Starting slip knot :https://youtu.be/lJcqsVcs8cw
Starting slip knot 1 or the Sloppy Slip knot : https://youtu.be/YfC7KmGpifs
What is a slip stitch : https://youtu.be/weB3QNbA8Iw
What is a crochet chain stitch ? https://youtu.be/pXx5ukBjKkY
Single Crochet : Sc : yo, insert hk into st ; yo (2 lps on hk); yo, draw through both lps. One sc made. Check out the video at https://youtu.be/ghACqBpA-3k
First stitch for Single Crochet : This is how I like to start my row of sc. Check out the video at https://youtu.be/6pVYRfsf4_M
Crab Stitch or Reverse Single Crochet stitch : Here’s an easy video tutorial at https://youtu.be/cG3crwyHPnk
Front post single crochet : fpsc : Post stitches are stitches worked around the post of a stitch on the row below. Here is an easy video tutorial for the fpsc at https://youtu.be/OQa8YLpkdXs
Back post single crochet : bpsc : Post stitches are stitches worked around the post of a stitch of the row below. Here is an easy video tutorial for the bpsc at https://youtu.be/L1K_MMLl-D4
How to seamlessly crochet in rounds : When working with head wear, this is a really neat way to seamlessly end each round. Here’s an easy video tutorial to show you how to this at https://youtu.be/ISBZK7Du7yE
Whipstitch to join : https://youtu.be/wZ-9LNzftMA
Invisible join : https://youtu.be/a6XZQ6VzJFM
Single crochet to join : https://youtu.be/6FXoW_47_dI
Instructions using U.S terminology
Please note that I start all my rounds with a ch 1 turning chain for ease.
Please check the top of this blog for video tutorials of all the stitches used in today’s pattern.
Please note that I take a lot of trouble to give loads of tips through my pattern sheet, so please read through the full sheet before you pick up your hook n yarn.
For
my preemie caps I have worked the pattern ensuring I have a total length of 4”
and a circumference of 12”.
Please check the top of this blog for a sizing
chart and the ideas below as well
1. Hat circumference = measure around the head just above ears and subtract one inch for a nicely fitted finished hat.
2. Crown width = (this is a flat circular top of the hat) you need to divide hat circumference by 3.14 (pi).
3. Hat height = Head circumference / 10 x 4.
So you need to measure circumference of the head (round head measurement) and keep checking the outer circumference of your work.
There is another trick for measuring circumference (without running your measure tape all around the edge of your circle as you are working).
This works for a cap that you are working top down, from the crown of the head.
It works by dividing your round head measure by pi (3.14).
So say your head measurement is 22, divide 22 by 3.14 = 7.
Remember when calculating diameter, you must account for the stretch of your yarn too.
So once the ‘flat portion’ for the crown (or the first few rounds while you are still increasing) of your cap is 7” diameter, you can stop increases and start increasing just the length (without increasing stitches for the round)
Right then, back to the pattern sheet.
In
general the pattern I’ve used for my preemie caps is as follows.
Magic circle : https://youtu.be/ISC39yOqWro
Half Double Crochet : Hdc : yo, insert hk into st ; yo (3 lps on hk) ;
yo, draw through all 3 lps. One hdc made.
Check out the video at https://youtu.be/sDiELJdB2Dg
Start Round 1 : with a magic circle and 10 hdc in that circle.
Join with a sl-st to the 1st hdc.
(10)
Round 2 :
(Increase round ) :
2 hdc in the 1st hdc and in each hdc all around.
Join
with a sl-st to the 1st hdc. (20)
Round 3 :
(Increase round ) :
hdc in the 1st hdc ; 2 hdc in the next hdc ;
*hdc
in the next hdc ; 2 hdc in the next hdc* ;
rep
*to* all around.
Join
with a sl-st to the 1st hdc. (30)
Round 4 :
(Increase round ) :
hdc in the 1st 3 hdc ; 2 hdc in the next hdc ;
*hdc
in the next 3 hdc ; 2 hdc in the next hdc* ;
rep
*to* all around.
Join
with a sl-st to the 1st hdc. (36)
Check
that your hat circumference is about 12” for preemie.
Round 5 :
hdc in the 1st hdc and in each hdc all around.
Join
with a sl-st to the 1st hdc. (36)
Rep
Round 5 till you have a finished length of 4”.
For
all the birds that need a white belly, I’ve ended with a round of hdc and then
finished off with a last round of crab stitch or reverse single crochet.
Check the top of this blog for a video tutorial.
All
the little birds have eyes, a beak and head feathers – and for each of these
I’ve just worked with a 3.5mm crochet hook and tightened the stitches a
bit. I have not used any polyfill
stuffing anywhere as these caps are intended for preemies in the NICU. If working for a slightly older kid, then you
could use poly-fill if you’d like. May I
suggest that you first fill your poly-fill into a stocking and then stuff – to
keep it non-allergic and super safe.
once again, this is my stocking-net ball, just
for your info (though have not used it for any of my caps here)
I
have also not made tail feathers for any of them as my preemie babies are going
to be lying down and they may hurt the back of the head. If making yours for an older child, go crazy
and spread huge smiles.
Some
of the angry birds have a slightly different shape, so come on along and see
what I’ve done with this cute range.
We’ve
done Terence, Red bird and Matilda over the past two days.. today Bomb, the
angry black bird gets his beak in ;)
Here are the range of Angry Birds caps :
TERENCE Angry Bird Cap : here
RED Angry Bird Cap : here
BOMB – Black Angry Bird Cap : here
CHUCK – Yellow Angry Bird Cap : here
STELLA – Pink Angry Bird Cap : here
BLUES – The Blue Angry Bird Cap : here
BUBBLES - Orange Angry Bird Cap : here
MATILDA – The white Angry Bird Cap : here
HAL – Green Angry Bird Cap : here
Bomb –Black angry bird cap
I
found this free pattern for a Bomb angry bird stuff toy on Ravelry here
There
are several sizes given here, but I basically used my simple pattern (top of
this blog) and then worked in the embellishments as instructed by the lovely
Elise Engh.
So what did I do differently : As always, I started with
the pattern as given and checked to see what circumference and length I was
getting. I just ensured that I keep to
the size I need.
I
also changed the head (top) feather a bit. I thought that the feather
should be a bit narrow at the bottom – so instead of working an sc all through,
I worked a sl-st in Row 2 for the 1st
few sts , and in Row 3, I ended with a the same few sl-sts. This gives it a thinner curved look.
I
started with a fsc chain and worked just 3 rows. I did not fold it over as instructed as I
wanted that curved look.
The
“difficulty” with my finish is that you need to be “very careful” in weaving in
all the ends (the orange end) as we’re not wrapping it inside the folded part.
If you're visiting me here for the first time, and have liked the experience, do add me to your mailing list (for your convenience) , and all my future free patterns will come straight to your mail box.
I’d appreciate if you could credit my blog (and link the original pattern link) when you make your own creation. Thanks.
Check out my awesome pins on Pinterest at https://in.pinterest.com/shyamanivas/
OR just my free patterns at https://in.pinterest.com/shyamanivas/free-patterns-made-by-me/
Join me on YouTube at http://youtube.com/shyamanivas
And on my Facebook page at https://www.facebook.com/Sweet-Nothings-Crochet/ for more patterns.
Do follow me on Twitter https://twitter.com/ShyamaNivas
Do follow me on Instagram https://www.instagram.com/sweetnothingscrochet/
Find me on Ravelry at ravelry.com/projects/shyamanivas/
Have a great day and see you soon.
Here are some of my other creations.
No comments:
Post a Comment
Thanks for taking the time to stop by. Do tell me what you think. Cheers